Phone Icon
Cart Icon
0
Menu

Microscale

Mirco Sol setting solution is for the most difficult irregular surfaces to be found on models. It completely softens the Microscale Decal, allowing it to drape down onto the surface of the model, conforming perfectly to surface irregularities without distortion. The most amazing results in seemingly impossible places are possible because Micro Sol actually makes the decal part of the painted surface. For that reason you should coat Micro Sol on for only a few seconds and then leave it alone. It does the work. Do not touch until the decal has dried, as the decal is very soft at this stage and could be easily damaged. For the best results, first apply Micro Sol to prepare the surface and enhance the adhesive. Make sure the surface is free of particles that could get under the decal’s film and cause a blemish. Then, when everything is dry enough that the decal will not move easily, apply Micro Sol with a small flat brush. Apply with as few strokes as possible so a not to disturb the decal. Then allow the decal to dry without disturbing it. One application is enough in most cases, but if necessary, a second application of Micro Sol can be helpful.

Micro Set is a very versatile decal setting solution that does several things to Microscale Decals to improve application. Micro Set should be applied to the surface of the model where you will be sliding the decal off the paper backing. Micro Set prepares the surface with special wetting agents that cut the oils in new paint and converts the adhesive on the back of the decal to a stronger and longer lasting one. In addition, Micro Set slightly softens the decal film to make it more flexible so that it will conform better to the model’s surface. Better adhesion of the decal to the model prevents tiny air bubbles from forming and results in an invisible carrier film for the so-called “painted on look.” To apply Micro Set: Use a soft flat artist’s brush and apply Micro Set where you are going to apply the decal. Then slide the decal off the backing paper using a small pointed tip synthetic bristle brush to carefully position the decal in its proper position. Blot the decal carefully with a tissue or paper towelling, being careful not to disturb its position. Allow the decal to dry overnight. It will then be ready for a protective coat of Micro Coat Flat, Satin or Gloss.

If there was ever a modeller’s secret, this is it. Micro Kristal Klear can do so many things that can make a big difference in the appearance of your models. First, Micro Kristal Klear is a liquid that can be used to form very real looking small windows up to about 1/4 in size. It is also an adhesive for mounting clear plastic parts, windows, etc. on models.

 

28ml Micro Liquid Mask Microscale
More Info
28ml Micro Liquid Mask Microscale £3.99
More Info
28ml Micro Liquid Mask Microscale £3.99
More Info
28ml Micro Kristal Klear Microscale
More Info
28ml Micro Kristal Klear Microscale £3.99
More Info
28ml Micro Kristal Klear Microscale £3.99
More Info
28ml Micro Set Microscale
More Info
28ml Micro Set Microscale £3.99
More Info
28ml Micro Set Microscale £3.99
More Info
28ml Micro Sol Microscale
More Info
28ml Micro Sol Microscale £3.99
More Info
28ml Micro Sol Microscale £3.99
More Info
1/48 German Armour Divisional Markings and Numbers Microscale 13010
More Info
1/48 German Armour Divisional Markings and Numbers Microscale 13010 £5.80£5.22
More Info
1/48 German Armour Divisional Markings and Numbers Microscale 13010 £5.80£5.22
More Info
28ml Micro Metal Foil Adhesive Microscale
More Info
28ml Micro Metal Foil Adhesive Microscale £3.99
More Info
Out of Stock
28ml Micro Metal Foil Adhesive Microscale £3.99
More Info
28ml Micro Liquid Decal Film Microscale
More Info
28ml Micro Liquid Decal Film Microscale £3.99
More Info
Out of Stock
28ml Micro Liquid Decal Film Microscale £3.99
More Info

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies, see our Privacy Policy for more details. Dismiss