Matho Models 1/35 Electronic Device Cardboard Boxes

Add realistic electronic device packaging to your 1/35 scenes with Matho Models Cardboard Boxes – Electronic Devices. The set includes 22 cardboard boxes in five designs, offering a varied selection of packaging to add small-scale detail to your modelling projects.

Each box is printed on slightly thickened paper to give the assembled item a realistic appearance. The inside is also printed with a brown cardboard texture, so you can display individual boxes open or closed. This interior detail gives you more flexibility when arranging the boxes and makes them particularly useful for detailing scenes where electronic device packaging is required.

22 Boxes in Five Designs

With 22 individual boxes across five different designs, the set allows a range of different arrangements to be created. You can assemble the boxes closed or leave them open to reveal the printed brown cardboard texture inside, adding useful variation to a 1/35 project.

Cutting and Assembly

For clean results, cut the boxes from the sheet using a sharp, preferably new, knife and a steel ruler. Also remove the thick white or black lines between the upper and lower flaps to help achieve a cleaner fit during assembly.

After cutting around the complete outline of a box, make one cut to the left and another to the right of each thick line. Use the tip of the knife where the line remains attached to the box, then carefully move the knife sideways to remove the unwanted piece.

For easier folding, gently run a knife along the bending lines using a steel ruler as a guide. Apply only light pressure so that these lines are scored rather than cut. This helps produce neat, sharp bends when forming each box.

Once the boxes have been folded and glued together, exposed white paper edges on the coloured designs can be lightly painted in the box colour. This finishing step helps disguise the white paper edges while retaining the printed exterior designs and brown cardboard-textured interiors.