Matho Models Photo-Etched Brass Strips 1.25-3mm

Matho Models 80046 provides a versatile selection of photo-etched brass strips for scale modelling projects. The set contains one photo-etched fret with 16 strips in total, covering eight different widths from 1.25mm through to 3mm. Each strip measures 13.5cm long and has a consistent thickness of 0.15mm.

The different widths are clearly listed on the fret, making it straightforward to identify and select the required strip. With two strips supplied in each width, the set provides a useful choice of brass material for modelling applications across all scales.

Eight Brass Strip Widths

The photo-etch parts fret contains two strips in each of the following widths: 1.25mm, 1.50mm, 1.75mm, 2.0mm, 2.25mm, 2.50mm, 2.75mm and 3.0mm. This gives a total of 16 individual brass strips, allowing you to select a width suited to the particular detail being created.

Every strip is 13.5cm long and 0.15mm thick. The combination of consistent thickness and progressively increasing widths provides a practical selection within a single fret. The dimensions printed on the sheet also make it easy to distinguish between closely sized strips while working.

Photo-Etched Brass for All Scales

These Matho Models brass strips are suitable for all scales, making the set a flexible addition to scale modelling projects where photo-etched brass strip material is required. Rather than being produced for one particular model or scale, the fret provides eight different strip widths that can be selected according to the needs of the project.

• 1 photo-etched brass fret
• 16 brass strips in total
• 2 strips of each width
• Widths from 1.25mm to 3mm
• 0.15mm strip thickness
• Each strip is 13.5cm long
• Strip widths identified on the fret
• Suitable for all scales

With two examples of every width and clearly marked dimensions, Matho Models 80046 provides a convenient selection of 0.15mm thick photo-etched brass strips ranging from 1.25mm to 3mm wide.