Iwata Neo CN Gravity Feed Airbrush
The Iwata Neo CN Gravity Feed Airbrush IW-NEO-CN delivers soft coverage and fine atomisation at low air pressures. Part of the Neo for Iwata Series, it is designed to work with small air compressors and provides a fine-to-wide spray scale ranging from a fine line to 1 inch (0.3mm to 25mm).
The Neo CN uses an N3 head system comprising a 0.3mm needle, needle cap, threaded nozzle and nozzle cap. Its gravity-feed, dual-action and internal-mix configuration gives control over the spray while allowing the airbrush to atomise effectively at low pressures. Optimal working pressure is 8-20 psi (0.06-0.14 MPa), although it can atomise at lower or higher pressures depending on the application, paint mix and compressor compatibility.
Interchangeable Gravity-Feed Cups
Two interchangeable paint cups are included. The larger 0.24oz (7ml) fluid cup has a lid and provides enough capacity for colour mixing, while the smaller 0.10oz (3ml) cup is suited to working with smaller amounts of spray medium.
The Neo CN can also hold a small amount of paint without a cup attached. This provides another option for touch-ups where only a tiny amount of paint is required. Additional cups can be purchased separately.
Iwata Neo CN Specifications
- Neo for Iwata Series
- Fine to wide spray scale from 0.3mm to 25mm
- Optimal working pressure of 8-20 psi (0.06-0.14 MPa)
- N3 head system with 0.3mm needle, needle cap, nozzle and nozzle cap
- Threaded nozzle
- Gravity-feed design
- Dual-action control
- Internal-mix configuration
- 3ml and 7ml interchangeable paint cups included
- Standard handle
- 5-year warranty
Its ability to achieve fine atomisation with small compressors makes the Neo CN suitable for general-purpose airbrushing as well as those using an airbrush for the first time. The combination of interchangeable cups, low-pressure operation, and a broad spray scale lets you match paint volume and spray coverage to the work you’re doing.
Browse our wider Airbrushes range or see more products from Iwata. Compatible air supply equipment can be found in Airbrush Compressors, with maintenance products available in Cleaning.
