No 153 Insignia Red Matt Enamel : Usage A solvent-based, fast-dry paint developed for use on plastic model kits but which can also be used on other substrates. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available (finish varies by colour) Substrate A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always try on a small test area to check suitability) Coverage 14ml tin covers approx.0.3m depending on thickness of application Application Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note that Metalcote colours are designed to be polished when fully dry. Drying time Gloss: 1-2 hoursMatt Satin: 20-40 mins touch dry, up to 24 hours for hard dryMetallics: hard dry in approx. 10 days. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight) How to clean: Brushes: use Humbrol Enamel ThinnersAirbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry.