DSPIAE BP-SP Plastic Ball Joint Strengthening Pen

Enhance Joint Stability and Mobility in Your Models

The DSPIAE BP-SP Plastic Ball Joint Strengthening Pen is a specialized tool designed to improve the damping and stability of ball joints in plastic models, particularly Gunpla. This pen applies a transparent rubber coating to ball joint surfaces, effectively tightening loose joints and enhancing pose retention without compromising articulation.

Key Features:

• Improved Damping: Forms a transparent rubber coating on ball joint surfaces, enhancing friction and reducing looseness, allowing for better pose retention.
• Durable Coating: The high-tenacity coating withstands prolonged handling, ensuring long-lasting joint stability.
• Easy Application: Shake well before use, press the tip to apply the coating evenly on the joint surface, and allow it to dry for 2–5 minutes until clear. Reassemble the joint after drying.

Usage Instructions:

1. Preparation: Shake the pen well before use.
2. Application: Press the tip down until the coating starts to flow. Apply evenly on the joint surface that needs strengthening.
3. Drying: Leave the painted joint aside for 2–5 minutes until the coat turns clear. Drying times may vary depending on coating thickness, ambient temperature, and humidity.
4. Reassembly: Once dry, reassemble the joint. If the desired tightness is not achieved, repeat the procedure after the coating dries thoroughly.

Precautions:

• Keep out of reach of children under 3 years of age.
• Store in a cool, dry place away from direct sunlight.
• Recap the pen promptly after use to prevent tip clogging.

For a visual demonstration of the DSPIAE BP-SP Plastic Ball Joint Strengthening Pen in action, you can watch the following video: