30ml Transparent Medium Ammo A.MIG-2400

If you want to achieve a highly glossy surface on the decals, apply the transparent lacquer Transparent Medium A.MIG-2400 in the same way, using low pressure of about 1 or 1.2 bar (14-17 psi), leaving a wet surface without flooding it. Then allow the surface to dry 24 hours with the pieces covered

The A-Stand – 30ml Transparent Medium Lacquer – AMMO presents an exclusive new range of lacquer-based, high- performance paints designed for modelling use. Formulated with ultrafine pigments, A-Stand is a range of professional paints that offers extremely realistic finishes difficult to match by other brands on the market. The A-Stand range offers a complete solution for the modeller: it includes an extensive colour chart of metallic and transparent tones, as well as primers and varnishes. These paints provide perfect results for any modelling subject, whether aircraft, military or civilian vehicles, figures, science-fiction and fantasy, or dioramas, providing a highly durable finish when dry.

Why do you need A-Stand?
The excellent fluidity of A-Stand products makes them easy to spray without clogging the airbrush. They also provide a tough and durable finish once dry, allowing the application of any other lacquer, enamel weathering products, or acrylic paint on top without issue.
A-Stand products dry to the touch in a short period of time of approxi- mately 30 minutes, depending on the amount of paint applied, ambient humidity and temperature.
The A-Stand paint series includes various lines of products used to apply a range of effects and finishes on your models.

What are the advantages of A-Stand?
The range of A-Stand primers are the most durable primers available for airbrush use. There are matt and gloss colours available for priming all model subjects and types. They can be used on any material, plastic, resin, and metal.
All A-Stand paints are created with the perfect consistency to be sprayed through airbrushes with nozzles 0.2 mm and larger. For the best results, apply them using air pressure of 12 to 15 psi, and apply from a distance of approximately 5 to 7.5 cm (2-3 in) from the surface of the model.
A-Stand provides you the perfect finish for your projects with three varnish options: gloss, satin and flat, each providing a highly durable finish when dry.