Metal tracks require special treatment and it’s easy to ruin them with poor “burnishing” fluids or home-made concoctions. With VMS Black Track Pro, a proven blackening system you are guaranteed that your tracks will to look amazing!
USE: 1. Put on protective gloves and eye protection. Pour blackening fluid into a receptacle. 2. Using tweezers submerge compatible tracks in the fluid for 5-10 min. Disperse any air pockets using a brush! Flip the tracks and again disperse any air pockets, allow another 5-10 min. Once the tracks are blackened to your satisfaction take them out, rinse with running water and dry using a paper towel and hair dryer. 3. Burnish the tracks using a shortened stiff flat hog brush (scrubber brush) or a soft metal brush to achieve the likeness of steel. Tested on tracks by Friulmodel and Masterclub. Tracks by other brands may react different – you proceed at your own risk! When in doubt test on a single track to check if compatible.
Recommended techniques: brush
Combine with: Metal tracks
Available volumes: 200 ml
Tested and compatible with Friulmodel®, Masterclub® tracks. Not tested with other brands – compatibility with other brands is not guaranteed, proceed at your own risk.
