Yellow Green Stuff is a room-temperature curing two-part epoxy putty sold either in tape format.
Mixing equal parts of the yellow ‘filler’ and blue ‘hardener’ produces a sticky green putty that feels a lot like chewed bubble gum. Once mixed, it has a worklife of 90 minutes, allowing time for shaping and detailing, reaching ‘ultimate hardness’ after 24 hours. Altering the mix with more blue or yellow component will produce a faster/slower and harder/softer cure.
We recommend using a little lubricant to prevent Green Stuff from sticking. Normally water is enough but some people also use others such as Vaseline, petroleum jelly or even jhonson baby oil to get smooth surfaces. Keep wet fingers and tools to make easier the sculpting and modeling process. You may also add talcum powder to reduce the stickiness and avoid fingerprints.
This set contains 36’5 inches of material –> 92 cm
OUTLET WARNING: This putty in its OUTLET version can be used but has a reduced shelf life of 1-4 months. It could be a bit more difficult to knead than the normal version. There are parts of the putty that may be slightly hardened, these can be removed if they affect the mixture.
