Amazing Cutter GH-AMC-LS God Hand

Clean cutting! Amazing sharpness! Savior of plastic board processing!

A completely new cutting tool that enables replacing blades with any marketed cutter blades to regain a new cutting edge at any time, even if the sharpness has deteriorated.
Just place the object to be cut between the grip and apply force to cut it off in a straight line.
Design for cutting plastic boards of < 2 mm thick and < 75 mm long, but in addition to plastic, materials such as paper, fabric, vinyl, and cardboard of < 2 mm thick and < 75 mm long can also be cuttable. Cut plastic board, paper, fabric, vinyl, and cardboard of < 2 mm thick and < 75 mm long. Capable of cutting straight across a 2 mm section of plastic boards. Saves time and effort in shaping after cutting. By cutting at the cutout portion, bars up to 5 mm thick are cuttable. Replaces the dull blade with a standard cutter blade (S blade) when cutting sharpness deteriorates. Replaces the receiving board with a store-bought 3 mm square bar (plastic, etc.) when it deteriorates. Exclusive scale included. Measure and cut out widths from 2 mm to 31 mm by attaching the scale to the main body. Griphook for safe storage [Replacement of blades] Blade for replacement is not included. Please purchase blades separately at a nearby store. *For cutting plastic boards, Excel Black Blade (small) is recommended. ▼Recommended replacement blades ■OLFA Cutter blade (small) [All-purpose type with excellent durability] Model No.: SB10K, SB10KS, SB10B, SB10BS, SB50K ■OLFA Stainless steel blade (small) [Rust-resistant stainless steel blade] Model No.: SSB5B, SSB5K ■OLFA Excel black blade (small) [Ultra sharp-edged blade for sharpness] Model No.: BB10K, BB10KS, BB50K ■OLFA Blade without broken line (small) [Durable all-purpose blade with no-break line] Model No. SB50K-OSN ■NT Small A stainless steel blade [Compact blade with a sharper blade angle than the existing black blade in pursuit of sharpness] Model No.: BA13P ■Scotch Titanium-Coat Cutter Spare Blade (S-Size) [Titanium-coated blade with long-lasting sharpness] Model No.: TI-CRS5 *The S size of the blade is generally used. Please pay extra attention when replacement as there may be a slight variation from manufacturers. [Replacement of the receiving board] Receiving board plays the role of a ‘cutting board’ that holds the cutter blade and gets damaged over time. A standard plastic 3 mm square bar is attached to the receiving board. Once the part is damaged, replace it with a new 3mm square bar from the market. No spare receiving board is attached. Please purchase a separate 3 mm square bar at a model store, cut it to 82 mm in length, and replace it with a new receiving board. Amazing Cutter ■Product Code：GH-AMC-LS ●Quality Indication ・Material: Special tool steel　 ・Handle coating: TPE ・Cutting materials (with a newly installed cutter blade): Plastic board, paper, fabric, vinyl, and cardboard of < 2 mm thick and < 75 mm long (Can also cut < 0.5 mm thick transparent plastic board) ⚠NOTE ・Please wear protective glasses for safety. ・Cutting materials may fly away. Please be sure no one or fragile objects are around before use. ・Water-proof paper is applicable for cutting but may cause the blade gets damaged sooner. Please be sure to replace the blade once it is damaged. ・Please do not touch the cutting edge directly. ・Please note that cutting using only the blade tip or with objects not fitting into the blade may cause the blade to chip. ・Please refer to the instruction manual included in the package for the replacement of the blade and the receiving board. ・Please do not apply a load exceeding the capacity. Pay particular attention to the load on the blade tip. ・Please wipe off any dirt or fingerprints and oil the shaft and cutting edge to prevent rusting. ・Please place in a case and keep out of reach of children.