Fewer air bubbles in the paint make painting parts with fine irregularities easier!
Fine and dense bristles prevent air from getting between the bristles and reduce bubbling.
The high density of the bristles minimizes air bubbles, making it easier to apply paint to small and uneven parts.
● A series with a very short grip compared to standard Brushwork PRO.
Short grip makes the center of gravity closer to your hand, making it less shaky and much easier to paint.
Choose the way you want to hold the paintbrush by your sense and enjoy freely painting!
● Features of the conventional Brushwork PRO are also well-maintained.
Japanese-made synthetic bristles (PBT) with a firm texture
Each brush is hand-made by Japanese brush craftspersons who specialize in synthetic bristles.
Animal hair brushes tend to become damaged, torn, and dry when soaked in solvents, but Brushwork PRO’s PBT bristles are solvent-resistant and less prone to damage.
The bond that holds the brush tip in place is also solvent-resistant, ensuring a long-lasting good brush tip.
The brush tip is more flexible than general chemical fiber brushes due to the firmness adjusted for easy brush painting on models.
An assorted range of brush tip shapes for use in different painting situations.
Short brush tip has a lower water supply for the paint, causing the paint to dry quickly.
This is why Brushwork PRO has designed the brush tip length to achieve ease of painting and paint absorbency.
Thanks to the special processing PBT bristles, bent bristles become straight again with hot water at 90℃.
● How to fix a brush with bristles bent out
Remove any dirt from the brush before soaking it in hot water.
*Please be careful of burns when using hot water.
1. Fill a heat-resistant container with hot water at 90℃, and soak the bent brush tips for about 10 seconds.
2. Use the sides of the container to straighten out any bent bristles.
3. Pull the brush up along the side to keep it straight.
4. Check the bottom of the brush is straight and leave it to dry.
*For some bristles with a limited lifespan in use, it may not work.
*Note that if the water gets cold during the process, it may not work.
Brushwork Short Grip Non-foaming Brush
■Product Code：GH-BRSYP-AW
●Quality Indication
・Dimensions: approx. 95 mm from brush tip to handle end, tip width approx. 3.5 mm, tip length approx. 5 mm
・Handle material: Wooden
・Bristle: High-quality nylon (PBT)
・Applicable paints: Water-based ◎ / Oil-based ◎ / Lacquer ◎ / Urethane ○
・Made in Japan
⚠NOTE
・Please place a cap and keep out of reach of children.
・Please do not use it for any other purpose.
・Please wear protective glasses during use.
・Please do not touch the brush tip directly.
・Please read the handling instructions for the paint before using solvents.
・Please be careful of burns when using hot water.
