This is a two-component colored resin with low odor, intended to simulate radioactive and toxic water in scenes,dioramas, etc. Two-component epoxy type resin with low odor. Resin and hardener come in separate bottles with dispensing nozzles. Two syringes are included in the box. Mixing ratio is 2:1. The curing process depends on the resin layer and the ambient temperature and usually takes about 24 hours. The components should be mixed thoroughly, stirring the mixture. It is advisable to avoid stirring during the curing process to avoid the generation of air bubbles that will be trapped. Pour in an enclosed space without cracks to contain the liquid.Recommended thickness up to 5cm.

UK Mainland Shipping Only	Yes

Delivery Information

Service	Estimated Delivery Time
Royal Mail Standard	Aim for 2–3 working days
Royal Mail Express	Aim for 1–2 working days
DPD	Aim for Next working day
Free Delivery (£60+)	2–6 working days (conditions apply)

Note: Working days are Monday to Friday. Delivery times are not guaranteed and may be affected by courier delays.

We endeavour to despatch all orders received by 12pm on the same working day, whenever possible.

Free Delivery Terms

Applies to orders over £60 under 2kg within Royal Mail size limits
Orders between £60–£99.99 that include aerosols, large flammable quantities, or exceed size limits may incur a delivery charge
Orders over £100 are delivered free with no restrictions to selected mainland postcodes

Postcodes not covered by our free DPD delivery, or standard DPD delivery service.

Scottish Highlands - AB36-38, FK17-21, IV1-39, IV52-54, IV63, KW1- 14, PA21-40, PA80, PH19-26, PH30-41, PH49-50
Scottish Islands - HS1-9, IV40-51, IV55-56, KA27-28, KW15-17, PA20, PA41-49, PA60-78, PH42-44, ZE1-3

AK Interactive Resin Radioactive Water Components Epoxy Resin (180ml) AK-8232

Delivery Information

Free Delivery Terms

Discover more from this range